ANCHORSEAL Classic Log & Lumber End Sealer- Water Based Wax Emulsion

Description

ANCHORSEAL® Classic is a premium wax emulsion end sealer for the prevention of end checks and drying splits in hardwood and softwood logs and lumber. By controlling the rate of moisture loss, up to 90% of end checks can be prevented.
FEATURES:
-Prevents up to 90% of drying splits
-Reduces blue stain and sapstain in logs
-Improves yield with less waste
-Water based
-Non-hazardous
-No solvents
-Available in summer and winter formulas
-Soap and water cleanup
Surface Preparation
-All areas to be coated should be clear of dirt and debris
Application:
-Apply ANCHORSEAL using a brush, roller or sprayer until it begins to drip slightly
-For optimal coverage, use a gas engine, electric, air operated or backpack sprayer from U·C Coatings
-If using spray equipment other than those sold by U·C Coatings, use 0.21"/0.55 mm tip or larger
-Logs larger than 24"/60 cm in diameter will require a heavier coating, or two coats must be applied within a 15 minute period
Cleanup & Storage
-Clean application equipment using hot soapy water
-Store unused ANCHORSEAL above 50°F/10°C to prevent freezing. Winterized formulas will protect against freeze damage