Vu-Data/VuData 3110 In-Circuit Component Tester / Curve Tracer / Oscilloscope

Description

Vu-Data/VuData 3110 In-Circuit Component Tester / Curve Tracer/Oscilloscope
Comes with a manual what you see in the pictures. If you don't see it, you probably wont get it.
Specifications are from Vu-Data and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
This unit has been tested and is guaranteed to work for 30-days, parts and labor, excluding freight. There is some discoloration on the plastic bezel and some scratches on the case.
The Unit's Serial Number Tag Reads:
Model Number:
3110
Serial Number:
2311
Power Requirements:
115 V/230 V, 50-60 Hz
Features:
Three full scale CALIBRATED voltage ranges.
CALIBRATED GRATICULE
Variable Output Voltage
LED Display annoucator for Voltage Range (3V/DIV, 10V/DIV, 20V/DIV)
LED Display Announcators for Display Mode (A - B)
LED Display for Power
A - B - COMPARE Display Modes
100 Hz Triangle-Wave-Test-Signal (eliminates display aberrations)
Versatile Test Leads
Rugged, all-metal Chassis eliminates interference from external noise environments.
Description:
The Model 3110 ICT is a portable "special purpose" type of oscilloscope and signal processing instrument that is used as an in-circuit component tester. The operator uses test probes to access the component and the results are displayed upon the CRT. The Model 3110 is a single unit suitable for bench-top use.
Four plastic feet are provided on the bottom of the unit. A tilt stand is provided under the unit for better operator visibility.
The Model 3110, In-Circuit Component Tester, provides a simple, sure and inexpensive way to detect defective components in-circuit or out-of-circuit, without the need of circuit power. The ICT provides all the capability required for even the most inexeperienced user to effecticely determine "Good" or "Bad" components. The tester is used to test virtually all circuit elements, including diodes, transistors, capacitors, resistors, integrated circuits of all types and many special purpose type devices.
Speciciations:
Tester Ranges:
LOW:
18 volts p-p open-circuit, 250 mA PK short-circuit
MEDIUM:
60 volts p-p open circuit, 2.5 mA PK short-circuit
HIGH:
120 volts p-p open circuit, 1 mA PK short-circuit
Variable Volts:
All ranges continuously variable to half-amplitude
Voltage Scale:
X axis graticule divided into 6 major divisions, each subdivided into 5 minor divisions. Illuminated Range Indicator gives horizontal scale factor (V/DIV) depending on Range Selectory
Accuracy:
±5% on all ranges irrespective of Vernier position.
Test Signal:
Triangle, approximately 100 Hz, other frequencies available.
Waveform Comparison:
COMPARE Mode switches display between two inputs at approximately 1 Hz, allowing good-bad comparisions without moving test probes. Illuminated Channel Indicators show selected input.
Front Panel Controls:
Range Selector (LOW, MED, HIGH), Variable Volts (Variable to half-amplitude), Display Mode (A, COMPARE, B), Vertical Position, Horizontal Position, Intensity, Instrument Power, Focus (screwdriver adjust), Trace Angle (screwdriver adjust)
Power:
115 VAC ±10%, 50-60 Hz, 230 VAC jumped selected. 20 Watts nominal, 25 Watts max.
Size:
3.5" H x 8.5" W x 12.3" L
Weight:
5.5 lbs.
Ambient Temperature:
Operating:
0°C to +50°C
Non-Operating:
-557deg;C to +75°C
Altitude:
Operating:
15,000 ft.  max.
Non-Operating:
50,000 ft. max.
Shock and Vibration:
Will withstand the shock and vibration conditions encountered in normal commercial shipping and handling.
Humidity:
Will operate in up to 95% relative humidity, non-condensing.
For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a .00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.
Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:
(1) Are you the end-user of this item?
(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
(3) What is the ultimate country destination?
02/01/22